Selling Price -$1,399.00
Selling Price -
$1,399.00
2020 Exmark Turf Tracer X-Series EFI TTX680PKC52400
Large properties. Small properties. Tight spaces. Ornate landscaping. Whether you’re looking for a large walk behind with all of the bells and whistles or something a bit more modest, the Turf Tracer EFI X-Series is the family to turn to. All Exmark walk-behinds are designed to be incredibly productive, delivering a one-of-a-kind cut with each pass. These machines are built to last, taking on the toughest mowing conditions without breaking a sweat. They’ll have you easily maneuvering on hillsides, around flower beds, and anything else that can end up on the lawn. These EFI mowers are available with 52- or 60-inch cutting decks.
Features may include:
Eco-Friendly
Reduces fuel consumption, fewer emissions and carbon footprint.
Reduce Green House Gases
Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Engine Efficiency
Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Fuel Savings
Delivers up to 25% in fuel savings.
Easy to Start
Easy start in any altitude or climate condition (no manual choke).
Sequential Fuel Injection
Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
- 2020
- Exmark
- Turf Tracer X-Series EFI
- TTX680PKC52400
- Walking
- Model: CV680 | Spec: 3015
- Brand: Kohler
- Series: Command™ EFI Propane
- 3,600 rpm
- Heavy-duty canister air filtration system
- 747
- Propane EFI
- EFI Propane | Indicator: Float Gauge
- Engagement: Electromagnetic 200 ft-lbs clutch.
- Hydro-Drive | Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54cm) tapered shafts.
- Release: Allows unit movement without engine running.
- Lever-actuated mechanical compression.
- 18 x 8.5-8, 4-ply Turf Master® | Caster: 11 x 4.0-5, smooth tread, semi-pneumatic.
- 18 x 8.5-8, 4-ply Turf Master®
- 12-volt battery with 20-amp alternator.
- Fordwad: 0– 6.75 mph (10.9 kmph) | Reverse: 0–2.25 mph (3.6 kmph)
- Blade: Approximately 18,500 fpm.
- Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- Casters: .38"
- Deck: 52"
- Cutter Housing: 7.75" | Shaft: 25mm (.98")
- 64.0 in. (162.6 cm)
- Blades: 3 Blades at 18" | 84.8 in. (215.4 cm)
- Cutting: 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 45.0 in. (114.3 cm)
- 33.5-lb propane
- Curb: 740
- Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
- $1,799.00
- $1,399.00
- Beavercreek, Ohio
- Pre-Owned
- UE30697
- 2020
- Exmark
- Turf Tracer X-Series EFI TTX680PKC52400
- 404630697
- Model: CV680 | Spec: 3015
- 1,795
- Propane EFI
- Available
- 64.0 in. (162.6 cm)
- Cutting: 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 45.0 in. (114.3 cm)